Since 1982 our Enterprise Group is well-known for diagnostic system solutions in the heart and circulation area. “custo med”-products are successfully used in hospitals and medical practices.
Engaged teams develop, produce, support and market our medicine products and software at our headquartes in Ottobrunn near Munich.
Authorized distribution and service partners care for our numerous “custo med” users as reliable contacts in Germany and over 30 more countries.
The cooperation with predominantly regional suppliers is strictly supervised. Our quality management gets certified every year via audit.
We provide high-quality diagnostic tools in a fast changing IT-environment for our professional customers and their patients.
Cardiac Rehabilitation – custo kybe
With custo kybe, outdoor training with up to five patients is possible. Their cardiac monitoring is performed simultaneously and in real-time. Coverage of the system is up to 400 metres. After termination of the training, the ECG data are transferred automatically to the custo Rehab software and are thus fully available for the HIS.
custo guard 1/3
- Recording channels 1/3
- Voltage supply: Lithium polymer battery with 105 mAh (approx. 1 hour charging time)
- Battery runtime approx. 2 days with 1 kHz sampling rate, approx. 60 days in standby mode
- Waterproof according to IP65 code
- Dimensions: approx. 70 * 42 * 12 mm (L * W * H)
- Weight: 27 g
- Interfaces: USB 2.0, Micro USB, Micro SD card up to 64 GB
- Storage capacity 3-channel-ECG: 1 GB: 29 days, 8 GB: 232 days
- Voltage supply: Lithium polymer battery with 3800 mAh (approx. 2 hours charging time)
- Battery runtime: 24 hours minimum
- 3.5 inch resistive touch display
- Dimensions: approx. 135 * 70 * 23 mm (L * W * H)
- Weight: approx. 230 g
Cardiac Rehabilitation – Outdoortraining
Definition of training group
The therapist can create a training group of up to five patients per one custo kybe. In addition to patient data, the upper and lower limits of heart rate can be determined for each patient individually. Afterwards, the defined training group is imported into custo kybe from the PC via USB.
Beginning of training
All participants of the training group automatically connect themselves to custo kybe and custo guard continuously transmits the ECG. On the display of custo kybe each participant is presented with name and current heart rate. The therapist can start the training by pressing the start button.
Performance of training
After having activated the start button, custo kybe starts recording the ECG signals. In the overview display patient name and the corresponding heart rate are always shown. If the heart rate exceeds its upper limit or falls below its lower limit, an acoustic alarm signal will be issued and the patient concerned will be highlighted in red.
ECG display during the training
By clicking on the patient in question, it is possible to change from the overview page to the ECG display of this patient. The amplitude of the ECG is freely scalable. With a click on the back button you can switch to the overview page.
Termination of training
In order to finish the training it is sufficient to click on the stop button. The recording is then terminated.
Evaluation of training
The stored ECG data from the training are transferred from custo kybe to the custo Rehab software via USB or SD card, where they can be handled by using the full range of Rehab software functions. After data download, custo kybe can be programmed for a new training group.
For more,visit: www.customed.de